| Management number | 238015234 | Release Date | 2026/07/11 | List Price | US$35.98 | Model Number | 238015234 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
<p>What's in the Box:<p> Amplifier<br> Bass Remote with clipping indicator<br> Birth sheet with tested power<br> Owner’s manual<br> Mounting Screws<br> Warranty<p> Description:<p> The Krypton series of amplifiers by Rockville are engineered to be reliable and are packed with features. Whether you are a car audio competitor or just like to enjoy loud music we engineered and designed these amps from the ground up to give you great sound quality. You will notice the cool battery voltage display meter which looks great but also serves as a tool for you to know if your battery voltage is dropping which would affect your systems performance. We designed the amps to be able to last for many years even if you are playing them at max volume before clipping for extended periods of time.<p> Our favorite feature of the Krypton series is the bass remote that has a clipping indicator. This allows you to set the amp to max output before clipping on any song. This will protect your subs while you maximize SPL. What is nice about this is that you can set the gain level to max before clipping on any given song in real time! If you use a DD-1 or another tool, you are setting the gain on one song but the next song might have more headroom or might clip depending on the levels it was recorded at (this is referred to as crest factor in the engineering world).<p> We guarantee that this series of amplifiers will not only meet their Dyno Certified power but exceed their rated power.<p> Another feature we love about this is the bass equalizer. Most amps have this feature however not all bass EQ's are created equal. Some bass EQ's will just clip your subs to death. Our bass EQ circuitry will boost the proper frequencies in a way that sounds good and is safe for your subs. In addition you can always use the clip indicator on the bass remote to make sure you are not sending a clipped signal to your subs. Our amplifier is meant to give as much clean power to your subs as possible.<p> Features:<p> Rockville KRYPTON-M0 1400w Peak/350w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp+Remote<br> Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)<br> 1 Ohm:350 Watts x 1 Channel &lt;1% THD+N (70% efficient)<br> 2 Ohm: 250 Watts x 1 Channel &lt;1% THD+N (80% efficient)<br> 4 Ohm: 150 Watts x 1 Channel &lt;1% THD+N (81.8% efficient) <br> Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)<br> 1 Ohm: 1400 Watts x 1 Channel<br> 2 Ohm: 1000 Watts x 1 Channel<br> 4 Ohm: 600 Watts x 1 Channel <br> Digital Voltage Display on Amp (Accurate within 0.15V)<br> Power/Protect/Clip LED Indicators on the front panel<br> Power/Protect/Clip LED Indicators on Remote control<br> Clip indicator on the bass remote allows you to quickly set any song to right before clipping in real time<br> Fully Adjustable 12dB / Octave Crossover with Differential Circuitry<br> Low Pass Filter: 50Hz - 250Hz<br> Subsonic Filter: 15Hz - 55Hz<br> Fully Adjustable 12dB Bass Equalizer<br> Remote Dashboard Subwoofer Control with Clipping Indicator<br> 8 Volt Preamp Circuitry<br> Phase Control Switch<br> High-Speed MOSFET Power Supply<br> Optical Coupler Class “D” Technology<br> Full IC-Controlled Protection Circuitry<br> Mute and Delay Soft Start System<br> RCA Preamp Line Output<br> Status Mode LED Indicator<br> Minimum THD at Rated Power: &lt;0.1%<br> S / N Ratio: &gt;90dB<br> Frequency Response: 15Hz - 250Hz<br> Damping Factor: &gt;150 @ 100Hz<br> 1x 50A Maxi Fuse<br> Passes the Signal Burst Test (In
KRYPTON M0| Brand | Rockville |
|---|---|
| Rms power rating | 350 W |
| Channels | 1 |
| Impedance | 1 ohm |
| Features | Adjustable |
| Peak audio power handling | 1400 W |
| Input/output type | RCA |
| Rec. use | Car, Car Audio, Performance |
| Color | Black |
| Audio output | 350 W |
| Total harmonic distortion | 0.1 % |
| Signal-to-noise ratio | 90dB |
| Items included | Amplifier, Bass Remote with Clipping Indicator, Birth Sheet with Tested Power, Mounting Screws |
| Accessories | Amplifier, Bass Remote with clipping indicator, Birth sheet with tested power, Owners manual, Mounting Screws, Warranty |
| Inputs/Outputs | RCA Preamp Line Output |
| Input/output direction | Output |
| Model | Krypton M0 |
| Vehicle type | Car |
| Volts | 5 V |
| Amps | 50 Amps |
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form